Saturday, June 07, 2014

"L" Room Drywall Update

I figured that a boring update would be better than no update, but at least this one will include a bunch of photos! :D

If you've read my last post, you know that I'm finally pushing to have the "L" Room upstairs DONE and start using it. The last steps are the ceiling and painting (and if you want to get picky, there's still no doors, and I'll work on the closet interior later).

Today I sanded all the ceiling and corners (at the top of the walls). What a mess. Just when I thought I had done a pretty good job, and that there'd be minimal sanding, I end up being totally wrong, and making a huge mess.

Overall, though, the ceiling did turn out nicely, and I had only one spot that needed touch-ups.

Here was the third (touch-up) coat from yesterday (drying):





I mentioned that I got some new drywall trowels and I thought I would show them. Pictured are the two new trowels (the corner trowel and the 10 inch trowel) along with my trusty 6" trowel which I've been using for years. You can see that the blade is spotty (from accidentally leaving it damp which caused rust spots to form).



This was a photo (a "selfie" if you will) of me from this afternoon right after I had finished sanding everything. There was dust EVERYWHERE, including some that was caked-onto my sweaty t-shirt, and it billowed all the way through the hallway upstairs.

Shortly after this, I cleaned up all the dust (shop vac), dusted myself off, and took a shower.

And the reason my mouth is open is because my nose was a bit plugged-up.



Sanded ceiling shots:





I'm really glad that I decided to protect the floor with this cardboard stuff. It's a construction-grade cardboard used both as a floor protector, and as a layer under hardwood (to prevent squeaking). I'll be using some when I redo the hallway on the main floor, but it comes in a huge roll for something like 15$.

One of the main reason for laying that down was for the paint drops (from primer, ceiling and wall paint), but I ended up also dropping several blobs of drywall compound everywhere (which would have been a nightmare to clean out of the gaps in the old floor).



As a last minute decision, I decided to go ahead and install the last panel in the corner (see photo below). If you remember a long time ago, I had loosely fitted this piece, but I didn't attach it because I wanted to be able to have easy access around both sides of the chimney for when I knock it down. Well, I figured I'd have enough room from the other side, and that it would be so much easier to just finish this room completely -all at the same time, and be DONE with it. Otherwise I would have needed to go back later and mud/paint this section maybe a year from now when the chimney is gone.

So this just made more sense. I cut the hole for the outlet, screwed-in the panel, mudded it (first coat only), and once it's good, I'll install that last corner block and length of baseboard, paint those, and then paint the whole room in one shot.



I figure that if things dry fairly quick, I could be done with this room by next weekend.

3 comments:

  1. Felicidades JC, ante todo por el gran trabajo realizado con la pared del garage y sobre todo en su base de hormigón. Veo que con en la habitación "L" vas avanzando a buen ritmo, el tener buenas herramientas de trabajo permiten avanzar rápido y con una calidad de acabado buena. Espero que en unas semanas tengas terminada la habitación, tengo una pregunta sin embargo, ¿pondras molderas en el techo de la habitación?.
    Saludos Valentín.

    ReplyDelete
    Replies
    1. Yes, the garage footing was quite a lot of work. As for the drywall, the new tools really do make a difference. As usual, thanks for your comment!

      Delete
  2. Good job. That's great and much appreciated. Thanks for sharing.

    ReplyDelete