Saturday, August 27, 2011

Crapity Crap Crap

Well I went ahead and randomly decided to tear-off the ugly and very poorly installed OSB in the back garage wall. In the process I made some very alarming, and awful discoveries. I kind of wish I hadn't looked, but in a way, I'm better off knowing about this now, before it gets worst.

The issue is that the OSB was hastily installed to cover up the wall. "Why?", I hear you asking? Well, because part of the wall has some extreme water damage. So much so, that a few of the vertical studs are completely rotted, and many of the exterior tongue and groove boards are rotted, cupped, and warped. In the centre of the "bad" section, I can actually grab the stud, and if I shake it, the whole wall moves. SCARY!

They made an attempt at a repair, but it's laughable, and ineffective.

At this point, I'm thinking of simply building an entire secondary wall on the inside. This new wall would properly support the roof, and the weight would be on the concrete. I'm fairly sure they made the garage over a proper footing/etc, since the bottom under the wall seems to be cement. It's hard to tell, actually.

Here are some photos. They actually make it look less bad than if you were looking at it in person. :S

This first part just made me laugh, and scratch my head. I have NO idea why they didn't just remove the block, or shorten the piece of pine tacked to the stud.

Photobucket

And what's that block? It's actually an original plinth block (for a doorway) that's in reusable shape. And it was barely held on the wall by one nail.

Photobucket

Note that they had actually cut the OSB to go around this block, and it looked ridiculous: Click to see a "before" shot from a while back.

Then this is where things started to go downhill. I was wondering why they had added some 2x6s at the top of the wall. I removed a short length of it, and you can see that one of the two top studs is water damaged into an 'S' shape. You can also start to see some of the cupped t-g boards.

Photobucket

I did not remove the rest of the 2x6, since it might actually be holding something together, but this is how much more of it there is. It covers about 1/2 the length of the garage.

Photobucket

Here's the really bad spot. It continues up about another 2 feet (over the wood rack which is blocking the view). That centre stud is completely rotted into crumbly bits, and the other two are also damaged.

Photobucket

This spot is closer to the front of the garage (towards the street), and it's not quite as bad here, but it's not good either.

Photobucket

This shot shows the bad portion of the wall (towards the street). The corner stud is in line with the centre of the ladder (for reference). From the corner, I have maybe 1-2 feet that are ok, then it's bad up to the edge of the photo.

Photobucket

The good news is that the other half is in great shape. This is the half that's towards the neighbour's house (the building next door is literally that concrete block wall.

Photobucket

So ummm, yeah. Fun times, eh? I think this is the point where most people would break down and cry their eyes out, but I'm actually not that surprised/upset. I can fix it, it's just gonna be a lot of extra work to do. :(

5 comments:

  1. Some people's quick fixes have caused a lot of pain, money and sometimes destruction. Never knew why people didn't just take the time and effort to do it right in the first place. good luck. Richard from My Old Historic House.

    ReplyDelete
  2. Yeah. The sad part is that probably 90% of the damage was caused by laziness (not cleaning the rain gutters). I have a large maple tree on the property, and I have to clean out he gutter along the garage at least 3 times a year. It probably just got clogged-up and caused all the water to back-up into the wall, causing all the rot.

    Luckily, building a new supporting wall from 4x4s or 2x6s won't be too expensive.

    ReplyDelete
  3. Well, day-umm! That's awful! Is that critical to supporting the roof, too?

    -L

    ReplyDelete
  4. Well, seeing as the roof hasn't caved-in just yet, I'd say partially. Where the really horrible spot is, on the wall, there is a noticeable sag in the roof line since it's no longer properly supported.

    ReplyDelete
  5. I'm sorry about your bad news, but glad that you will be able to catch this in time. I know you're the man to do it right.

    The closest I've ever come to such a situation was when I discovered at my last house that the sewer had been installed during the Depression and was made out of tar paper. Miraculously, it had lasted for 40 years!

    ReplyDelete